Cambridge Single Motor Riser Recliner Chair

OKIN motor electric riser recliner chair sofa

The Cambridge Single motor riser recliner chair is a stylish, luxurious, pillow back chair. The beige/biscuit mosaic colour fabric is neutral and suitable to blend in with other furniture in the room of your choice.



The Cambridge chair is a comfortable soft to medium sit in a traditional design. The single motor and easy to use handset allows you to rise or recline very easily. 

Specifications:
CHAIR HEIGHT - 109cm/42.9"

CHAIR WIDTH - 81cm/31.9"

CHAIR DEPTH - 90cm/35.4"

SEAT HEIGHT - 49cm/19.3"

SEAT WIDTH - 50cm/19.7"

SEAT DEPTH - 50cm/19.7"

CHAIR FABRIC - BISCUIT MOSAIC

MAX USER WEIGHT - 145kgs/23stone

A letter to Customer.

Dear Valued Customer,



Thank you for purchasing power lift and Recline chair from us. Your chair is tested and certified by TUV,Rohs,and CE electrical standards to assure that you have purchased one of the safest chairs available. We believe that this product is made fr om the highest quality components available, is engineered to give you maximum service with minimum maintenance, and is backed up with the strongest warranty in the industry. We hope that you enjoy years of pleasurable use of our chair and that this chair become a true assist to you in both sitting down and standing up.

Please take a few moments to review this manual to become familiar with the operation of this chair and our warranty. If you need additional information, please call the dealer from whom you purchased this chair.



importANT!

READ THIS MANUAL FIRST BEFORE INSTALLING OR OPERATING YOUR POWER LIFT AND RECLINE CHAIR.

Your power lift and recline chair has been engineered from the leg levelers up to provide the ultimate in strength and reliability.

Great care has been taken to provide you with total comfort and safety. Our QC Thoroughly inspects and tests each unit prior to shipment.

Power lift chair is a medical device. Therefore,you are required to excercise caution when operating it to ensure your personal safety and that of others around you. The following are rules for the safe operation of your power lift chair.

WARING

1>Care should be taken in the unpacking of this unit, so as not cause injury to persons or damage the unit.Dispose of all plastic bas and covers, as they can be something hazard to small children.

2>Do not allow children or pets near the chair while the chair is operating.

3>Dd not allow children to play with or operate the chair at any time.

4>Hand control should be unplugged and placed out of reach of children when the chair is not in use.

5>Do not glop down into the chair when getting into it,or while it is in it’s lift position. Flopping down into the chair will damage it and could cause personal injury.

6>Do not place fingers or hands between the seat cushion and the inside arm of the chair while sitting in the chair or when the chair is in operation or plugged into a power source.

7>Do not retrieve fallen objects from inside or under the chair while the chair is plugged into a power source.

8>Do not operate chair if there are any persons,pets or other obstructions under or in front of the footrest,under the chair or behind the chair.

9>Do not smoke while operating ,sitting or resting in the chair.

10>To reduce risk of electrical shock,do not immerse any of the electrical components into a liquid,or spill any liquids onto electrical components. Do not open any of the electrical components.There are no serviceable parts.

11>Warranty will be avoid if any of electrical components are opened by other than a qualified service person.

12>Make sure the chair is placed at the specified distance from a wall/corner.Failure to do so can damage the chair and will void the wrranty.

13>Do not use any type of electrical extension cord to plug your chair into an electrical outlet.



INSTALLATION

1>Remove the transformer from the thansformer box(located behind the lower outside back).

2>Plug the transformer into the outlet and connect the power cable from the chair into transformer as shown.Power cable is located under the chair attached to the motor with white zip tie. Remove the zip tei, extend the cable under and out behind the chair.



3>Place the chair in the desired position in the room,keeping it 35cm away from the wall.If placing the chair into a corner, keep it 35cm from the wall as shown.







4>Adjust the leg levelers on the bottom of the chair if necessary to level the chair. Some high pile carpets can obstruct the footrest operation by rubbing against it. Adjust the levelers to a height above the pile.

5>Slide the hand cnotrol from between the back and arm out toward the back of the chair. Secure the cord into the quick release cable clamp located above the magazine pocket on the arm of the chair.





Note:Your power lift chair can be stopped at any time during lift or recline by releasing the selected button, offering you a wide range of comfortable positions. Select the position that best suits your needs. The motor is set to shut off when it reaches its fully extended or fully retracted position if the selected button is not released. If you sohuld go past your desired position select the button to bring you back to your desired position. You can repeat the process as often as you like.